Skip to content
KULAINAAUTOMATION
Menu

Service

Energy audit and retrofit

A Kulaina energy audit measures how your electrical system actually runs, logging load, power factor, harmonics and temperatures, and turns the results into a costed list of fixes. We then retrofit existing panels, upgrading APFC banks, replacing old breakers and adding automation, so the savings are delivered rather than just reported.

What's included

  • Load, voltage and power factor logging at the main incomer and key feeders
  • Harmonic measurement and capacitor bank health check
  • Thermographic scan of panels and busbar joints
  • Report with findings, savings estimate and payback for each fix
  • Retrofit: APFC upgrades, detuned reactors and breaker replacement
  • Automation and remote monitoring for existing panels

Visits and response times

Energy audit and retrofit: visits and response times
Site measurement2 to 7 days of logging
ReportWithin 10 working days of logging
Area servedJaipur and across Rajasthan

An audit is only useful if someone acts on it. Every recommendation in our report comes with the work needed to deliver it, and we can carry out that work ourselves.

Frequently asked questions

What does an electrical energy audit find?

Typically power factor penalties, overloaded or lightly loaded transformers and cables, harmonics damaging capacitors, hot joints and idle loads left running. The report puts a cost and a payback on each fix.

Can you upgrade an old APFC panel instead of replacing it?

Often, yes. Failed capacitors and worn contactors can be replaced, stages resized to today's load and detuned reactors added, as long as the enclosure and busbars are in good condition.

Book a visit

Book a service visit

Send your single-line diagram, BOQ or tender reference. An engineer replies within one working day.

Have drawings or a tender? Use the full enquiry form.