Industry
Panels for hospitals and healthcare
Hospitals cannot let operating theatres, intensive care units or imaging equipment lose power. Kulaina builds AMF, DG synchronisation and distribution panels for hospitals, with automatic changeover to backup for critical loads, separate essential and general circuits and layouts that let one section be maintained while the wards stay powered.
Risks we design for
Critical loads must move to backup fast
Operating theatres and intensive care units need an unbroken supply. UPS systems carry them through the seconds a DG set takes to start, and automatic changeover puts the DG set on load as soon as it is ready.
Maintenance without shutting wards
A hospital never closes, so panels must let one section be isolated and serviced while the rest stays live.
Sensitive and non-linear loads together
Imaging equipment, UPS systems and lifts share the supply. Essential and general circuits need separating, and harmonics need managing.
Recommended panels
We test the full changeover with your DG sets before handover, with the load connected, so the hospital knows how long the switch takes before it is needed in an emergency.
Compliance notes
- Panels built to IS 8623 and IEC 61439
- Essential and general circuits on separate boards
- Changeover and protection tested with the DG sets before handover
Frequently asked questions
Does a hospital need an AMF panel or a synchronisation panel?
An AMF panel moves the load to one DG set when the supply fails. Larger hospitals with two or more DG sets use a synchronisation panel so the sets share the load and back each other up.
How can panels be maintained without a shutdown?
By splitting loads across sections with their own incomers and isolators, so one section can be made dead and serviced while the others stay powered from the main supply or the DG.
Discuss your panel requirement
Send your single-line diagram, BOQ or tender reference. An engineer replies within one working day.